Built-in voltage-boost compensation circuit and algorithm maintains constant torque during operation. Supply voltage DC 20–80 V (24/36/48 V recommended): at 24 VDC input the internal voltage boosts to 58 V; at 36 VDC, to 65 V; at 48 VDC, to 75 V. A 12 VDC-start variant is also available, boosting internally to 44 V.

Built-in back-EMF absorption circuit and algorithm dissipates the back-EMF generated during motor operation

Built-in brake control, alarm signal output, etc.

DIP switches select single-pulse control, dual-pulse,internal IO pulse control and other functions

Brand-new 32-bit DSP technology

Motor parameters auto-matched at power-on

Optically isolated differential signal input

Optically isolated alarm output or brake control, or derived as potentiometer speed control

Maximum pulse frequency up to 500 kHz (factory default 200 kHz)

Current is easy to set, selectable within 0.3–6.0 A

Microstep range 200–51200; any microstep value can be set via serial port

Over-voltage, under-voltage and over-current protection

With rising edge/falling edge, IO pulse generation, single/dual pulse, high-response / low-vibration